6 Steps How to Clean Electronic Drums with an Alternative Method

This post contains affiliate links. If you use these links to buy something we may earn a commission at no extra cost to you. Thanks.

The performance of a drum kit may reduce, especially if it has accumulated dust for a long time. As such, you will need how to clean your drum set. Keeping your electric kit clean will help it last long.

Yet, most users don’t know how to clean electronic drums kits. In this article, we will share with you some steps that you could take to clean your electric musical instrument. Besides, a clean electric drum works great.

What Do You Need to Clean an Electric Drum Set?

Before setting out to tidy up your electric drum, you would like to first have the necessary requirements. The following things would make your work tidying up your electric drum easy.

Whether you have the Roland pro drum kit or any other, here is how to go about this process:

Steps How to Clean Electronic Drums

Step 1: Disassemble The Drum Pads

Your aim is to give your drum pads a thorough clean up and a new look. Since the musical instrument is assembled, you will first disassemble it. This will ensure you thoroughly tidy up each component.

Therefore, know how to disassemble and reassemble the components of your drum pads. Make sure to loosen any piece of hardware on the drum pads for access to each component.  Dismantle the instrument and group the metal components together.

Remember to do the same for the wooden pieces. You will have an easier moment putting your instrument together since you’ll know where you placed a particular component.

Step 2: Cleaning the Rims

Your drum rims will accumulate chipped wood pieces due to constantly striking the rubber drum heads with the sticks. Each accumulating dirt from the chipped wood pieces reduces the good performance of your musical instrument.

You will use a 1-inch brush to brush off the chipped wood dust from the rims. Use a smaller brush for stubborn dust that is harder to remove with larger bristles. You can also brush your mesh snare drums and toms drums in this fashion.

A little brush works excellently to clean any dirt that could damage your kit. As such, it is an excellent supply to have before starting to clean your kit.

Any good metal gloss or a general cleaner would help you to clean the rims.

Dispense the metal gloss on the damp cloth and apply the it on the rims. Make sure every bit of the rims is covered in metal. You can add more polish if you feel you have not covered a section of the rim. Brush the entire rim to make it shine. You can as well use terry cloth for this cleaning step.

Step 3: Wipe the Cymbals

An electric kit like Roland Pro will mostly have rubber drum cymbals. When polishing the rubber cymbal, wash using warm water and a damp rag.

An 303 Aerospace Protectant is very crucial if you want to polish the rubber cymbal. Polishing will make them have a brand new look.

303 Marine UV Protectant Spray for Vinyl, Plastic,...
  • Powerful UV blockers prevent fading, cracking and premature aging
  • Dries to a clear matte finish
  • Restores lost color and luster
  • Safe and effective for: vinyl, Plexiglas, carbon fiber, rubber, plastics and finished leather
  • Cleaner Size: 32 oz.

Last update on 2021-04-17 / Affiliate links / Images from Amazon Product Advertising API

Ensure the wooden parts of the rubber cymbal don’t come into contact with the chrome gloss. As such, line the delicate parts with the masking tape as you’re polishing the cymbals.

Once you have covered the rubber cymbals in the non-abrasive chrome polish, wipe it away with the damp soft cloth. At the end of this step, your cymbals will restore their glimmering look.

Step 4: Wipe the Hardware

The hardware for assembling the kits will also need to have their shine. Polishing the hardware follows the same pattern if you want to get an impressive result. If there are wooden parts, line them up with the masking tape. A gloss cream and a soft cloth are used here.

Dab the gloss cream with the soft damp cloth and apply it to the hardware. Rub the hardware to distribute the cream and also to make the hardware shine.

Wipe every inch of the hardware, including areas that might be harder to reach. Once you get a new shine on the hardware, you can go to the next step.

Step 5: Wipe the exterior and interior of the drum shells

Music Nomad MN110 works well if you are looking to wipe the toms, mesh snare head, and bass drums. If used, it helps to remove grime, finger prints, and keeps the shells clean with a shiny look.

Sale
MusicNomad Premium Drum Detailer and Polish, 8 oz...
  • Cleans, shines, and protects while removing fingerprints, dust, and spots
  • Great for cleaning drum shells, Chrome Hardware, rubber e-pads, Thrones and more
  • Gloss enhancers to give a high gloss shine
  • Safe on all finishes, including gloss, matte, and metal
  • Proudly Made in the USA

Last update on 2021-04-17 / Affiliate links / Images from Amazon Product Advertising API

The Music Nomad MN110 is safe to use on the kits, and has a pleasing smell that is quite inviting. When polishing these components of the drum set, use a different piece of cloth.

You can still use a terry cloth to apply the gloss on the kits. Music Nomad MN110 is not as corrosive to the drums as the chrome polish. As such, you don’t need to line up any component with a masking tape when applying this gloss.

Step 6: Reassemble the Drum set

Once you have cleaned the components of the drum set, you can reassemble them back together. Reassembling takes little time, especially when you grouped metal components, and did the same for the wooden part.

Your electric drum will be as clean and performs excellently as a new one.

An alternative method for Cleaning Electronic Drum Pads

Vacuum the Drum Pads

If you’re looking to remove the dust on the drum, you can use a vacuum to suck it away. A vacuum works exceptionally well to remove any dirt that reduces the impressive performance of the musical instruments.

Adam's Barrel Vacuum - Interior Car Vacuum Cleaner...
  • ✅ QUICK, EASY TO USE - Designed for both detailing pros and garage enthusiasts. Easily clean your vehicles interior with this portable easy to stow barrel styled car vacuum.
  • ✅ 3 INTERCHANGEABLE, RUBBERIZED TOOLS - Brush, chisel, and standard round attachment make any cleaning job easy. Clean loose debris, dog hair, dirt, car seats, floor mats, door jams, and other hard to reach areas with ease.
  • ✅ HIGH POWERED, UPGRADED MATERIALS - 120V, 60Hz, 10A, 1200 Watts this detailing tool is quiet yet powerful with specialized upgraded components including a 20’ power cord, 10’ rubberized metal hose, and specialized tips.
  • ✅ HEPA Filter, High Capacity - Featuring a HEPA reusable filter and easy to remove lid. This 5 gallon high capacity shop styled vac can be quickly cleaned and refreshed for daily use.
  • ✅ 110% SATISFACTION GUARANTEE & 1 YEAR WARRANTY - Adam’s strives to bring the BEST detailing tools, kits, waxes, sealants, ceramic coatings, car accessories, microfiber towels, wash mitts, sponges, applicators and other high-quality car cleaning products to our customers. If you don’t agree & are not satisfied, let us know and we’ll do everything we can to make it right!

Last update on 2021-04-17 / Affiliate links / Images from Amazon Product Advertising API

Clean the drum pads with warm water

Using a terry cloth with warm water and some mild liquid soap would help here. First, rub the soft cloth against itself to generate a foamy lather. Wipe down the drum heads, and rinse the soap off the rag with warm water. Wipe down the drum heads in a circular motion to clean all soap until they dry up.

How to Clean Chrome Drum Hardware

Using a drum key, unscrew the chrome hardware on the drum ring. Also, remove the drum head from the rum. Disassembling the drum would help you to clean the hardware separately.

Mix one-quarter baking soda with water to get a baking soda paste for cleaning the chrome hardware. Use can use a toothbrush to spread the paste on the chrome hardware and scrub every inch of the hardware.

Then use a clean cloth to buff and wipe the chrome hardware to dry it. You can also use commercial chrome cleaner products instead of using baking soda paste.

Frequently Asked Questions

How do you care for electronic drums?

Vacuuming electric drum pads is a good way of caring for the drums. A vacuum cleaner sucks always the dust, leaving the rubber pads working at their best. You can also wipe the drum pads with warm, soapy water.

How often should you clean the electric drums?

Keeping your electric drums working at their best should be your top priority. Dust affects their performance. It is good to always clean your drums after using them. You can wipe them clean to remove the dust right after practicing and honing your musical skills.

How should I wipe the electronic drums?

The electric drum pads have an intrinsic value since they determine the performance of your musical instrument. As such, you should wipe them with a lot of care. Be sure to wipe the drum pads in a circular motion.

This will ensure you effectively collect all dirt, leaving nothing to chance. Also, cleaning the drum pads in a circular motion ensures you don’t scratch the delicate surface. Your instrument will still have its impressive performance after wiping it down with warm water and a liquid detergent. If clean electric drums is what you want, be sure to wipe them down in a circular motion.

What chrome gloss product can I use to clean my electronic drums?

You can find plenty of chrome polish products on the market. But Weiman Clean and Shine might be an ideal polish for electric drums.

Besides working on silver surfaces, it also works on chrome-finished surfaces.
It excellently restores the pristine chrome finish on the electric drums. As such, it is worth investing in this product. You can also search for other products that yield incredible results. The market is saturated with plenty of such excellent polish products.

Conclusion

Electric drums will accumulate dirt with time. With time, this may affect how your drum will work. Fortunately, cleaning it may restore its impressive performance. Yet, only a few people know how to clean electronic drums.

This article has discussed various ways that may help you to take good care of your drumkit. As such, you might have an easy time cleaning your electronic drum and continue enjoying the rich sound it produces.

You will not require a lot of things, with little supplies of baking soda and a toothbrush, you are ready for the task. Therefore, cleaning your drums is inexpensive yet very effective. Be sure to use this guide to clean your musical instrument for it to last many years.

I have been playing drums for over 10 years and it is my love. I would like to provide you with the best information about drums.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.